- 34 -
Press
OK
button on the remote control to continue and
the following message will be displayed on the screen.
You must select a search type to search and store
broadcasts from the desired source.
Aerial Installation
If you select
AERIAL
option from the
Search Type
screen, the television will search for digital terrestrial
TV broadcasts.
NOTE: Press the menu button to cancel.
After all the available stations are stored, the Channel
List will be displayed on the screen. If you like the sort
channels, according to the LCN(*), please select “Yes”
and then press
OK
.
Press
OK
button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence.
Cable Installation
If you select
CABLE
option and press
OK
button on
the remote control to continue, the following message
will be displayed on the screen:
To continue please select
YES
and press
OK
. To
cancel the automatic channel scan, select
NO
and
press
OK
.
You can select frequency ranges from this screen.
Use the
up/down
arrow keys.
You can enter the frequency range manually by using
the numeric buttons on the remote control.
Set
Start
and
Stop Frequency
as desired by using
numeric buttons on the remote control.
After this operation, you can set
Search Step
as 8000
KHz or 1000 KHz.
If you select 1000 KHz, the TV will perform the search
process in a detailed way. Searching duration will
the search process thus increase accordingly. When
finished, press
OK
button to start automatic search.
The TV will search and store available broadcasts.
Satellite Installation
If you select the
SATELLITE
option, you can set a
satellite and watch individual satellite programmes.
When selecting satellite installation, the
antenna type
menu
will be displayed. You can choose between
three types of antennas. By using the
Left/Right
keys
you can select the antenna type (
Direct, Unicable
or DiSEqC
).
