- 28 -
Heat sources and flames
• Do not expose the TV and batteries to open
flames and sources of intense heat such as an
electric heater.
• Do not place candles and other open flame
sources near the TV in order to avoid the
spreading of fire.
Ventilation
• The slots and openings on the TV set are intended
for ventilation and to ensure reliable operation.
• To prevent overheating, these openings must not
be blocked or covered in anyway.
Power consumption in Standby and during
operation
ATTENTION:
During long absences the
TV should be switched off. This extends the
lifetime of the screen and saves energy.
Keeping away electrical devices from children.
In order to separate the device completely from the
electricity network, the mains plug has to be pulled
from the power socket. Therefore the device has to
be set up in a manner that unhindered access to the
socket is guaranteed, so that in an emergency case
the plug can be pulled immediately. To exclude fire
danger, the power cable should be pulled from the
power socket if the device is not used for a longer
period, e.g. when you´re on vacation.
LCD Screen
•
The LCD panel is a high technology product with
several million thin layer transistor which solve
even subtle image details.
•
Occasionally, a few non-active pixels may
appear on the screen as a fixed blue, green or
red point. Please note that this does not affect
the performance of your product.
•
Do not scratch the screen with fingernails or
other hard objects.
Information regarding disposal
Packaging is recyclable and should be recycled.
Packaging material, such as for example plastic bags,
should be kept away from children. Batteries, even
those without heavy metal, are not to be sent to your
regular household refuse site but in an environmentally
sound manner. Please make enquiries concerning the
legal regulations in your area. The symbol on the
packaging indicates that the electric or electronic
device has to be disposed separated from regular
consumer waste. Within the EU there are separate
disposal systems. Please contact your local authority
or local dealer at whom you purchased the product
for further information.
Connection to a TV distribution system (cable TV
etc.) using a tuner
The connection of devices, which are already
connected via a network connection or other devices
to the safety earthing of a building, via coaxial cable
Wall mounting (optional)
To prevent injury, this TV must be securely attached to
the wall in accordance with the installation instructions
(if the option is available).
Spare parts
If your unit needs a replacement part, make sure
the repairer uses only specified by the manufacturer
devices. Not approved spare parts or devices with the
same specification can cause, fire, electrical shock or
other hazards.
Power Source
Connection to mains power 220- 240V/50Hz.
Install the system in accordance with the installation
examples, in order to avoid damages.
Cleaning
Before cleaning, unplug the TV from the
wall socket. Do not use liquid or aerosol
cleaners. Only use a soft, dry cloth.
Thunderstorms
In thundery weather and when the set
is not to be used for an extended period
or during absence you should remove the mains
and antenna plugs from the set. Overvoltage can
damage the TV.
