27
9.2 Audio setting
You can choose between mono or stereo reception (if available) . Select the
audio format by long press INFO/MENU > Audio setting >
<Forced mono> or <Stereo allowed>
Forced mono can be useful if you have a weak signal and want to avoid noise.
9.3 Time & Date
The time and date can be update automatically or manually. This setting screen
and method are similar to the operation in DAB (see page 23 f.).
10. Troubleshooting
problem
cause
solution
No sound
Static sound
Sound is distorted
Volume not turned up
Signal reception too low
Volume is too high
Adjust the main volume
Adjust the antenna or move
the unit to a stronger signal
location
Desired station not found
Weak signal
Use the Manual Tune func-
tion
The display shows
„Service not available”
Poor reception
No DAB coverage in your
area
Adjust the position of the
aerial or change location
The display is blank
This may occur if the broad-
caster changes the Iabel
of a service or removes a
Iabel
The radio will try to retune
Perform a scan
I can hear a burbling noise
on some Stations
Battery power is low
weak signal
Insert some new batteries
Use mains power
Try re-positioning the aerial
