22
5.3 Set sleep time
1. To set the sleep time, continuously press the SLEEP button to select from
Sleep off, 15 minutes, 30 minutes, 45 minutes, 60 minutes, 90 minutes.
2. When the time runs out, the radio will enter standby mode.
6. DAB Mode (digital radio)
To switch to DAB mode press the DAB/FM button.
6.1 Program selection
Use the ◄ or ► button to cycle through the DAB programs. Press the ENTER
button to enter the current program Once you have reached the last station in the
found ensemble, it will revert back to the first station again.
6.2 Full scan
To perform a Full scan, press and hold the INFO/MENU button for 3 seconds.
When the <Full Scan> option appears press the ENTER button.
6.3 Manual tuning
You can manually tune the receiver. This can help you aligning your aerial or
when adding stations that were missed while auto tuning.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Full scan> option appears press either ◄ or ► button and find
<Manual tune>, then press ENTER button.
3. Use the ◄ or ► button to cycle through the DAB channels, which are num
-
bered from 5A to 13F.
4. Now press the ENTER button to enter the current multiplex. The top line will
now display the multiplex name (if received) and the signal strength is indicated
by the bars below. Adjust your aerial so that more full bars are displayed. lf you
wish to exit the manual tuning mode, press the ENTER button.
6.4 Display modes
Every time you press the INFO button,the display will cycle through the following
display modes:
The information is displayed on the lower segment of the LCD display.
Ź
DLS* (scrolling text with artist - title a.o.)
Ź
signal strength
Ź
program type
Ź
ensemble/multiplex**
Ź
frequency
Ź
signal error rate
Ź
audio data rate and compression
Ź
time
Ź
date
