26
7.8 Software Version
To check your software version.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Scan Setting> option appears press either ◄ or ► button to select
<System>, then press the ENTER button.
3. Use the ◄ or ► key to find the <SW Version> option and press ENTER to
review.
8.
FM Mode
1. Switching from DAB to FM
Press the DAB/FM button to switch to FM mode.
The display will show „FM Mode“, the radio will then automatically tune to the
nearest available station.
8.1 Scan setting
There are two types of scan, you can select it by long pressing INFO/MENU >
Scan setting >All stations / strong stations only
- Strong stations only: will only stop at stations with a strong signal.
- All stations: will stop at any station found with a strong or weak signal.
The name of the station will appear on the top line of the display if the RDS (radio
data system) is available. Otherwise the frequency will be displayed. On the bot-
tom of the display, it will show the station information.
8.2 Display modes
Every time you press the INFO/MENU button, the display will cycle through the
following display modes:
Scan setting •
< All stations >
Note: Press ◄ or ► button to select the previous/next option. Press ENTER but
-
ton to confirm.
Radiotext
As with DAB, the broadcaster can include a scrolling text that displays infor mation
about the current program. lf Radiotext information is not available, then the dis-
play will show <No Text>.
9. System settings in FM mode
9.1 Full Scan
To search for a FM station, you need to long press and then release the SCAN
button. Once a station has been found, the scanning will stop automatically. lf no
station is found,then the tuning will stop once it has cycled through the entire FM
band (87.5–108 MHz) .
