background image

6.3.6 Dolby Digital (AC3)*

A number of movies are transmitted in the Dolby Digital for-
mat. This is indicated after a programme has been selected
by the Dolby logo 

in the information window. If you have

connected a Dolby Digital 5.1 channel amplifier to the system,
you can enjoy movies in 5.1 channel Dolby Digital sound
where available.
To enjoy this feature, you must simply connect the Audio Out
Digital output (see Point 4.5.2) of your DVB receivers with the
digital input of your Dolby Digital 5.1 channel amplifier. 
Where a programme is broadcast in Dolby Digital sound, this
will be indicated by the Dolby logo being displayed in the
information window when the programme is selected. If the
function Dolby Digital (AC3) is switched on, these program-
mes will automatically be reproduced in Dolby Digital format.
If the function is not enabled (

off

) , Dolby Digital sound can

also be switched on manually. Please refer to Point 7.4.1 of
this operating manual.

6.4 Antenna adjustment

To position the antenna in the optimum direction, the receiver
is equipped with a signal strength indicator. 
>

Press the 

Menu

key to display the 

Main Menu

.

>

Now use the 

arrow keys up/down

to select the

entry 

Settings

.

>

Confirm by pressing 

OK

.

The sub-menu 

Settings

will be displayed. 

(Fig. 6-6)

>

Now use the 

arrow keys up/down

to mark the

menu line 

Antenna adjustment

.

>

Confirm by pressing 

OK

. The menu 

Antenna

adjustment

will be displayed. 

(Fig. 6-7)

>

Now use the 

arrow keys left/right

to enter the

channel with the weakest reception signal.

>

Now position the antenna in such a way that both bars
show a maximum position. 
red bar

poor reception

yellow bar

good reception

green bar

excellent reception

7 Operation

7.1 Switching on and off

>

You can switch on the digital receiver by pressing the

On/Standby

key either on the receiver front panel, or

on the remote control.

18

(Fig. 6-7) 

(Fig. 6-6) 

*

valid only for DigiPal 2

Bedanl DigiPal2_DigitMod T1engl  15.06.2005  16:33 Uhr    Seite  18

Содержание DigiPal 2























































Отзывы: