SCART Mode
Use the
OK
key to select either
FBAS, RGB
or
S-VHS
, in accordance with the specificati-
ons of your TV set. For standard equipment retain the default setting
RGB
.
Sub-titles
Your DVB receiver has the facility to display sub-titles. Provided the function Sub-titles has
been enabled, and the preferred language selected in terms of the Audio signal selection is
available, the sub-titles will be superimposed on the picture automatically. If the function has
not been enabled, it can be set manually, Sub-titles are indicated by the symbol
in the
information display. Please also refer to Point 6.11 in this instruction manual.
Dolby Digital (AC3)
A number of movies are broadcast in Dolby Digital sound format. This will be shown on scre-
en, as the Dolby logo
will be displayed in the information window once the programme
has been selected. Where broadcast, and if you are equipped with a Dolby Digital 5.1 chan-
nel amplifier, you can enjoy the appropriate movies in full 5.1 Dolby Surround Sound.
All you need to do to anjoy this feature is to connect the Audio Out Digital connection of you
DVB receiver (see Point 4.6.2 above) to the digital input of your Dolby Digital 5.1 channel
amplifier.
Where a programme is broadcast in Dolby Digital Sound, the Dolby logo will be displayed in
the information window on screen as soon as the programme is selected. If the option Dolby
Digital (AC3) has been selected in the relevant menu, these broadcasts will automatically be
reproduced in Dolby Digital format.
If the AC3 function has not been selected previously, Dolby Digital Sound can also be selec-
ted manually. Note Point 6.4.1 of the instruction manual for this facility.
5.4 Adjustments for the External Unit
Once you have made all the individual selections, to make the receiver conform to your pre-
ferences, it may still be necessary to make some adjustments for the receiver to work opti-
mally with your antenna/satellite dish. The default factory setting is pre-programmed for
reception of ASTRA and EUTELSAT broadcasts by means of a universal LNB (see Glossary
at end for technical terms). Once the receiver has been connected to an external reception
unit and switched on, these programmes can be received without any further adjustments.
Should you also wish to receive signals from other satellites, or if you have a different type of
LNB, you can make the following adjustments in your receiver to provide for these program-
mes:
>
Press the
Menu
key to display the
Main Menu
.
>
Use the
up/down arrow keys
to select the entry
Settings
.
>
Confirm by pressing the
OK
key.
The menu
Settings
will be displayed.
15
bed_anl_DigiCom1A-1plus-englisch.qxd 21.09.00 16:25 Seite 15
