45
Your receiver bears the CE control label, and complies with all relevant EU
standards.
Subject to change and printing errors. Correct at 08/00
TechniSat, DigiCom 1A and DigiCom 1 plus are registered trademarks of
TechniSat Digital GmbH
P.O.Box 560
Germany
www.technisat.de
803_00
Problem
No reception of channels pre-
viously received
Remote control not working
Time not displayed in Standby
mode
Temporary interruptions on Pro 7,
Sat.1, TM3, Cable 1, DSF and
HOT
Unit cannot be operated
-
Possible cause
Disf faulty, or position changed
Channel moved to another trans-
ponder
Channel no longer broadcast
Wrong mode set
Batteries spent
Time not entered
Interference caused by DECT
cordless telephones
Defective data stream -> unit
blocked
Solution
Check dish
Initiate search (see point 7.7)
None
Change mode (SAT1/SAT2)
Replace batteries
Set to ZDF for 30 secs. to acqire
time
Place telephone base station furt-
her from receiver
Depress both up and down
programme keys on receiver
for 5 secs. simultaneously,
then switch on unit again
bed_anl_DigiCom1A-1plus-englisch.qxd 21.09.00 16:25 Seite 45
