Proceed as follows with the programming:
Source
>
Use the
arrow keys
to mark the column
Source,
then use the
OK
key to enter
the desired source (
TV
or
Radio
).
Channel
In this line you should select the TV channel on which you want to record a programme:
>
Mark the appropriate line
Channel
by means of the
arrow keys
.
>
Press the
OK
.key.
A programme list will be displayed.
>
Use the
arrow keys
to select the desired programme.
>
Confirm by pressing
OK
.
The selected programme will now be taken over into the timer menu.
Date
>
Use the
arrow keys
to mark the column
Date.
>
Use the
numeric keys
to enter the date on which you wish to record a programme.
Start
>
Use the
arrow key right
to mark the column
Start
.
>
Use the
numeric keys
to enter the starting time for the timer in this line.
Stop
>
Repeat the steps as described under “Start” to enter the stopping/ending time.
In order for all events to be considered, there should be a break of at least one minute
between the stopping time of one timer setting and the starting time of the next timer
setting!
Repeat (optional)
>
Use the
arrow key right
to mark the column
Rpt
.
>
Press the
OK
key.
A selection window will be shown, with several repeating suggestions.
1x
Timer on
T
Daily repeat
1xW
Repeat once a week
1-5
Repeat only on weekdays
6-7
Repeat only on weekends
>
Select the desired function by means of the
arrow up/down keys
.
>
The setting will be stored by pressing the
OK
key.
>
When you have completed the programming, press the
yellow function key
in
22
DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 22
