12
Combination – Bottom flap with seed roll:
Between the plastic bottom flap and the seed roll should be a distance of
0,2 mm. The seed roll shouldn´t rub on the bottom flap.
The stainless steel bottom flap with stopper must be pressed to the seed roll to stop the full elements.
Just the geared seed roll elements turn.
Cover sheet:
For correct output amount take care on following point:
Above the seed roll is the adjustable cover sheet. It can be moved upward or downward.
For small seed put it in the lower third.
The quicker the seed roll turns the more move the cover sheet upward. So the seed roll is surely
completely filled every turn.
ATTENTION!!
Do this Adjusting before calibrating the machine. Otherwise the seed output amount is not correct.
Page 11 of 26
Metall seed roll with
plastic bottom flap.
Standard seed roll with
plastic bottom flap.
Seed roll for small amount with
stainless steel bottom flap with
stopper.
Adjusting knob
Cover sheet
Содержание FRONT-TURBO
Страница 4: ...4...
Страница 15: ...15...
Страница 26: ...26...
Страница 27: ...27 ATTACHEMENT 2 Declaration of conformity...