Technify Motors CD-135, Руководство по эксплуатации и обслуживанию

Страница: 66 / 152

Operation & Maintenance Manual
CD-135 / CD-155
OM-02-02
Chapter:
Issue:
Issue date:
Page:
Content: 02-OM-06-02
4
30.07.2014
6
74
Revision no.:
Revision date: 7
20.07.2016
6.2.5 Every 600 operating hours
•
Carry out all steps described in Section 6.2.3, Page 5 of this
Chapter
•
Carry out all steps described in Section 6.2.4, Page 5 of this
Chapter
•
Replace alternator 14V (refer to Annex 12, Page 51 of this
Chapter)
•
Replace alternator 28V (refer to Annex 12, Page 51 of this
Chapter)
•
Replace high-pressure pump (refer to Annex 11, Page 50 of
this Chapter)
•
Inspect fuel feed pump,

05-7312-K0073xx, 05-7312-K0133xx

(refer to Annex 18, Page 74 of this Chapter)
•
Replace rail pressure control valve

(refer to RM-02-02, Chapter 73-10.07)
•
Inspect dual mass flywheel

(refer to RM-02-02, Chapter 05-20.02)
•
Inspect AltReg loom

(refer to RM-02-02, Chapter 05-20.01)
•
Inspect gearbox

(refer to Annex 15, Page 66 of this Chapter)

CAUTION: If TS-1 jet fuel is being used, the high-pressure pump MUST be
replaced every 300 operating hours.

CAUTION: The 600 hrs gearbox inspection interval is only valid in
combination with the dual mass flywheel and with the use of
gearbox oil Shell Spirax S6 ATF ZM or CENTURION Gearbox
Oil N1. In all other cases, the interval remains at 300 hrs.
Expect gearboxes listed under Chapter 6.2.7 / Chapter 6.2.8.