Operation & Maintenance Manual
CD-135 / CD-155
OM-02-02
Revision no.:
Revision date:
Chapter:
Issue:
Issue date:
Page:
Content:
02-OM-01-02
4
30.07.2014
5
8
-
-
1.9
Scope of Supply
The scope of supply is specified in
Chapter 2, Section 2.2, Page 1 of this Manual.
1.10
Qualifications of the Operating and
Maintenance Personnel
The organizations who carry out work on the engine must be
authorized by Technify Motors GmbH.
All tasks and checks described in this manual must only be
performed by trained personnel who have the necessary licenses
and a valid training certificate issued by Technify Motors GmbH.
Further information about Technify Motors GmbH authorized
organizations can be found in the Service Bulletin
TM TAE 000-0003.
All applicable national and international regulations must be
observed.
1.11
Update Information Service
This manual is covered by a continuous update information
service. The engine / aircraft operator is responsible for keeping
up-to-date with all amendment bulletins issued by Technify
Motors GmbH and integrating them into this manual.
Please inform Technify Motors GmbH if the owner of the engine /
aircraft changes. This is the only way to ensure that information
about any necessary / recommended changes to the engine /
handbook can be passed on. A form is included for this purpose
in this manual. See FOBL E8-01 - Change of Hands.
1.12
Service Life of this Engine
WARNING:
The service life of the engine is limited.
Technify Motors GmbH therefore most strongly recommends
that the engine should be replaced when it reaches the end of
the operating period recommended in the relevant current
version of the Service Bulletin
TM TAE 125-0001
.
Содержание CD-135
Страница 2: ...This page intentionally left blank...
