Technics SU-G30, Руководство пользователя, Страница: 45 / 100

45
En
gl
is
h
Troubleshooting
vTuner/Spotify
Playback does not start.
The sound is interrupted.
•
The station that does not broadcast cannot be
played back. (It will be skipped or return to the
list.)
•
Internet Radio may not be played back properly
depending on the network condition.
•
Depending on the internet connection
environment, the sound may be interrupted or
it may take some time to play back.
•
Internet Radio is an audio broadcasting service
transmitted via the Internet. Depending on the
broadcaster or condition of the transmitting,
the sound quality may vary.
Cannot display the information properly.
•
Track names, station names, etc. which are
managed by vTuner/Spotify may not be
displayed properly.
Remote control
The remote control does not work properly.
•
The batteries are depleted or inserted
incorrectly. (

14)
• To avoid interference, please do not put any
objects in front of signal sensor. (

12)
•
Change the remote control code if other
products react to this remote control. (

15)
Messages
• The selected file cannot be played back.
• Select the playable file.
- About supported format, refer to “File
format” (

51)
AUTO OFF
•
The unit has been left unused for about 20
minutes and will shut down within a minute.
Press any button to cancel it.
Checking Device
•
The unit is checking the connected iPhone/
iPad/iPod or a USB device. After this display has
disappeared, start operating.
Connect to Network
•
Connect this unit to the network and then
wait for the start of the Firmware Update via
Internet. (

40)
Connect USB Device
•
Download the latest firmware on the USB flash
memory and connect it. (

40)
Download Fail
• The firmware download has failed. Press any
button to exit. Please try again later.
•
The server cannot be found. Press any button to
exit. Make sure that the network is connected
to the internet.
Empty
•
The selected folder is empty. Move tracks into
the folder and retry the operation.
• The server is not found on the network. Check
to see if the server is connected to the same
network as this unit, and retry the connection
to this unit. (

18)
•
No Internet Radio station is registered to the
favorite list. Add a station to the list. (

26)
Error
• Incorrect operation is performed. Read the
instructions and try again.
Fail
•
Network connection is not complete. Try the
setting again. (

18)
Firmware update is available
•
The firmware (free of charge) for this unit is
available.
Press [OK].
Press [ ], [ ] to select “Yes” and then press
[OK].
•
The progress is displayed as “Updating %”
while updating. ( stands for a number.)
• Do not disconnect the AC power supply
cord or turn this unit to standby while
updating. (

40)
•
When the update has finished successfully,
“Success” is displayed.
Disconnect the AC power supply cord and
reconnect it after 3 minutes.
• For the update information, refer to the
following website.
www.technics.com/support/firmware/
“F ” (“ ” stands for a number.)
•
There is a problem with this unit.
- Is the volume extremely high?
If so, lower the volume.
- Is this unit placed in an extremely hot place?
If so, move this unit to a cooler place and wait
a few moments and then try to turn it on
again.
If the problem persists, write down the
displayed number, disconnect the AC power
supply cord and consult your dealer.
(45)