Technics ST-GT1000, Руководство по обслуживанию

Страница: 19 / 64

Manual presetting
1 2 1 4 1 3
2
3
MEMORY
AUTO MEMORY
PRESET
4
MEMORY
AUTO MEMORY
Preset channel
This allows you to preset the services and stations you want in the
channels you want.
Tune to the broadcast.
You cannot preset in DAB if nothing is being received. (“NO
SIGNAL” or “NO SERVICE” is displayed.)
Press [-MEMORY –AUTO MEMORY].
Do not hold the button down or else auto presetting will start.
Turn [PRESET] to select the channel to put
the broadcast into.
You can also select the channel from the remote control with
[PRESET (
N
or
M
)] or the numbered buttons ( i “Selecting
channels”).
“
∗
” indicates a channel has already been used.
Press [-MEMORY –AUTO MEMORY].
The broadcast is preset and the previous display is restored
in about 2 seconds.
Repeat steps to to preset other broadcasts.
4
3
Note
2
1
A
Selecting channels
Select a band
Turn [PRESET] to select the channel.
Channels not containing a broadcast are skipped.
You can also select the channel from the remote control with
[PRESET (
N
or
M
)] or the numbered buttons.
For channels 1 to 9, press the corresponding number.
For channels 10 or over, press [
≥
10], then the two digits.
e.g. To select channel 25, [
≥
10]
=
[2]
=
[5]
For your reference (DAB only)
If nothing is currently being broadcast in the selected channel, “NO
SIGNAL” is displayed. Press [DISPLAY] at this time to show the
ensemble’s frequency for about 2 seconds.
B
Copying and deleting channels
You can move the broadcast preset into channel 10, for example, to
channel 1.
To copy
Select the channel and
1. Press [-MEMORY –AUTO MEMORY].
2. Select the target channel.
3. Press [-MEMORY –AUTO MEMORY].
The original channel remains unchanged.
To delete
Select the channel and
Press and hold [–MEMORY DELETE] for about two seconds until
“DELETE” is displayed.
B
A
B
FREQENCY
SERVICE
FM
1 2 3
4 5 6
7 8 9 0
AM
DELETE
DISPLAY
MENU
DATA
ANNOUNCEMENT
10
DAB
TUNING MODE
SERVICE
FREQENCY
MEMORY
ENTER
PTY
SEARCH
PRESET
PRIMALY/
SECONDARY
PRESET
1 2 3
4 5 6
7
8 9 0
10
MEMORY
AUTO MEMORY
PRESET
MEMORY
DELETE
The channels remain in the memory even if the unit is disconnected from the power source. Temporary malfunction may cause the channels to
be erased. Preset the channels again if this occurs.
Note
1 4