Technics ST-GT1000, Руководство по обслуживанию

Страница: 9 / 64

7 7
7 7
7
Equipment Connections
Make sure that the power supply for all components has been
turned off before making any connections.
Connect to an amplifier
1
White (L)
Red
(R)
To make a digital recording
Connect this unit to digital recording equipment
(MD or DAT deck) through “OPTICAL OUT
AUDIO”.
To download DAB data
Connect this unit to a DAB data system through
“OPTICAL OUT RDI”.
(Carefully read the operating instructions of the equipment
you intend to connect.)
Dust-protection caps
Remove the dust-protection caps (
a ) before connecting the
optical cables.
OPTICAL OUT terminals not in use should be covered by a
dust-protection cap.
Note
2
DIGITAL
OPTICAL
IN
DIGITAL
OPTICAL
IN
AC IN
LINE OUT OPTICAL OUT
AUDIO RDI L
R
DAB ANT
AM ANT FM ANT
EXT LOOP
75
75
TUNER
a
A B C
1
2
3
Connect the AC mains lead.
Connect the AC mains lead only after all other connections
have been made.
Insertion of Connector
Even when the connector is per-
fectly inserted, depending on the
type of inlet used, the front part of
the connector may jut out as
shown in the drawing.
However there is no problem
using the unit.
3
Connector
Approx. 6 mm
Appliance inlet
Amplifier (not included)
Optical cables
(not included)
Digital recording equipment
(not included)
AC mains lead
(included)
This unit
Stereo phono cable (included)
Stereo phono cable
(included)
(United Kingdom only)
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD BEFORE CONNECTION.
DAB data system, etc.
(not included)
To household
mains socket