Technics ST-C700D, Руководство по эксплуатации

Страница: 24 / 176

24
Listening to DAB/DAB+
You can preset up to 20 channels.
Preparation
≥
Make sure that the DAB antenna is connected. ( > 10)
≥
Press [NWP] and then [
N
INPUT
O
] below [NWP]
repeatedly to select “DAB/DAB+”.
– If you select “DAB/DAB+” for the first time, the system will start
the “DAB auto scan” procedure.
1
Press [NWP].
2
Press [MENU].
3
Press [
3
,
4
] repeatedly to select “Auto
Scan” and then press [OK].
4
Press [
3
,
4
] to select “Yes” and then press
[OK].
≥
“Auto Scan” is displayed.
To find the best antenna position, use manual tuning to
search selected DAB frequency block.
1
Press [NWP].
2
Press [MENU].
3
Press [
3
,
4
] repeatedly to select “Manual
Scan” and then press [OK].
4
Press [
3
,
4
] to select a frequency block to
scan and then press [OK].
1
Press [NWP].
2
Press [
6
] or [
5
] to tune in to the station.
3
Press [PGM].
4
Press the numeric buttons to select a preset
number.
≥ Do steps 1 through 3 again to preset more stations.
≥ A station previously stored is overwritten when another station is
stored in the same preset number.
≥ You cannot preset a station when the station is not broadcasting or
when you have selected a secondary service.
≥ Previous station memory is cleared during auto scan.
1
Press [NWP].
2
Press the numeric buttons, [ : ] or [ 9 ] to
select the preset station.
You can view information about the DAB broadcast,
programme type, ensemble label and frequency.
1
Press [NWP].
2
Press [INFO] to view available information.
Some DAB/DAB+ stations provide a secondary service as
well as the primary service. If the station you are listening to
is providing secondary service, “
” will be displayed.
1
Press [NWP].
2
Press [MENU].
3
Press [ 3 , 4 ] repeatedly to select
“Secondary” and then press [OK].
4
Press [
3
,
4
] to select the secondary
service and press [OK].
≥ The setting will go back to primary service when changes are
made (e.g. the station is changed).
When adjusting the antenna, you can check the reception quality.
1
Press [NWP].
2
Press [MENU].
3
Press [
3
,
4
] repeatedly to select “Signal
Quality” and then press [OK].
4
Press [
3
,
4
] to select frequency.
DAB auto scan
DAB manual tuning
Memory presetting
Selecting a preset station
Viewing available information
DAB Secondary
DAB signal quality
Frequency block
Frequency
Reception quality
0 (poor) to 8 (excellent)
e.g.,
(24)
ST-C700DE-TQBM0007.book 24 ページ ２０１６年１０月２６日 水曜日 午後１時１７分