Technics ST-C700D, Руководство по эксплуатации

Страница: 21 / 176

21
Engli
s
h
Using Bluetooth
®
You can listen to the sound from the Bluetooth ® audio device from this unit wirelessly.
≥
Refer to the operating instructions of the Bluetooth
®
device for details.
≥ If you intend to use an NFC (Near Field Communication)-compatible Bluetooth ® device, proceed to “Connecting by NFC”.
Preparation
≥
Turn on the Bluetooth
®
feature of the device and place the
device near this unit.
1
Press [NWP].
2
Press [
N
INPUT
O
] below [NWP] repeatedly
to select “Bluetooth”.
3
Press [MENU].
4
Press [
3
,
4
] repeatedly to select “Pairing”
and then press [OK].
5
Press [ 3 , 4 ] to select “Yes” and then press
[OK].
≥
“Pairing” is indicated on the display.
6
Select “ST-C700D” from the Bluetooth
®
device’s menu.
≥ The name of the connected device is indicated on the
display.
≥ If prompted for the passkey, input “0000”.
≥ You can register up to 8 devices with this unit. If a 9th device is
paired, the device that has not been used the longest will be
replaced.
For NFC-compatible Bluetooth ® devices (Android™
devices with version 4.1 or later) only
With the touch of an NFC (Near Field Communication)-
compatible Bluetooth
®
device to this unit, you can complete a
series of steps from registering a Bluetooth ® device to
connecting it to this unit.
Preparation
≥ Turn on the NFC feature of the device.
1
Press [NWP].
2
Press [
N
INPUT
O
] below [NWP] repeatedly
to select “Bluetooth”.
3
Press [MENU].
4
Press [
3
,
4
] repeatedly to select “NFC” and
then press [OK].
5
Press [
3
,
4
] to select “Yes” and then press
[OK].
6
Touch and hold your device on the NFC
touch area of this unit within 20 seconds.
(
> 7)
≥
Do not move the Bluetooth
®
device until it displays a
message or reacts in some way.
Once the Bluetooth
®
device has reacted, move the
device away from this unit.
– When the connection of the Bluetooth
®
device is complete,
the name of the connected device is indicated on the
display.
– The location of the NFC touch area differs depending on the
device. When a connection cannot be established even if
your Bluetooth
®
device has touched the NFC touch area of
this unit, change the position of the device.
≥ If you connect another NFC-compatible Bluetooth ® device, the
previously connected device will be disconnected automatically.
≥
When the connection is established, playback may start
automatically depending on the type of device being used.
≥ Connecting by NFC may not work properly depending on the type
of device being used.
≥
Do not make an NFC connection in any other way than instructed
in the Operating Instructions. Doing so may cause malfunction.
Connecting via Bluetooth
®
menu
Connecting by NFC
(21)
ST-C700DE-TQBM0007.book 21 ページ ２０１６年１０月２６日 水曜日 午後１時１７分