Technics ST-C700D, Руководство по эксплуатации

Страница: 19 / 176

19
Engli
s
h
2
Press [NWP].
3
Press [ N INPUT O ] below [NWP] repeatedly
to select “USB”.
4
Press [
3
,
4
] to select an item and then
press [OK].
≥ If there are any other items, repeat this step.
Operations on the remote control
∫
Random repeat playback
Press [RND].
Each time you press the button:
∫
Repeat playback
Press [
`
].
Each time you press the button:
≥
You can use repeat playback in combination with programme
playback.
This function allows you to programme up to 24 tracks.
Preparation
≥ It is not possible to programme tracks by moving folders.
Move all the tracks you want to programme to a single
folder in advance.
1
Select the folder containing the music file to
which you want to set programme playback.
2
Press [PGM] in the stop mode.
≥ “Program Mode” screen will be displayed.
3
Press [OK] to display the programming
screen.
4
Press [
3
,
4
] to select the desired track.
5
Press [OK].
≥ Do steps 3 through 4 again to programme other tracks.
6
Press [
1
/
;
] to start playback.
≥
To return to the “Program Mode” screen, press [
∫
].
Operations on the remote control
≥ Programmed content is maintained as long as the input source is
set to “USB”.
≥
The programme memory will be cleared:
– When the USB device is disconnected.
– When the unit is turned to standby or off mode.
≥
You can use programme playback in combination with repeat
playback.
Stop Press [
∫
].
Pause
Press [
1
/
;
].
≥ Press again to restart play.
Skip Press [
:
] or [
9
] to skip track.
Search
During play or pause, press and hold
[
6
] or [
5
].
≥ On the unit: press and hold [ : ] or [ 9 ].
≥ This operation may not be available for
some formats.
On
All tracks in a folder are repeated
randomly.
≥ “RND
`
” is displayed.
≥ During random playback, you cannot skip to
the previous track.
Off Turns off random repeat mode.
1-Track
Only plays the selected track.
≥ “1
`
” is displayed.
All
All tracks in a folder are repeated.
≥
“ ` ” is displayed.
Off Turns off repeat mode.
Programme playback
Stop
Press [ ∫ ].
≥ Programmed content is maintained.
Check the
programmed
order Press [ 2 , 1 ] in the stop mode.
≥
To return to the “Program Mode” screen,
press [OK].
Add tracks Do steps 3 through 4 in the stop mode.
Clear the last
track
Press [CLEAR] in the stop mode.
≥
It is not possible to select and clear the
desired programmed track.
Cancel
programme
mode
1
Press [PGM] in the stop mode.
≥ “Clear Program List?” is shown.
2
Press [
3
,
4
] to select “Yes” and
then press [OK].
≥
The programme memory will be
cleared.
(19)
ST-C700DE-TQBM0007.book 19 ページ ２０１６年１０月２６日 水曜日 午後１時１７分