16
2 Setting up your TG588v v2
DMS3-CTC-25-42 v1.0
2.5 Configure your TG588v v2 services
Step 1:
Browse to the TG588v v2 web interface
Proceed as follows:
1
Browse to
(this is the default IP address of your TG588v v2) on a computer or device that is currently
connected to your TG588v v2 (either wired or wirelessly).
2
The TG588v v2 web interface appears. By default, you are logged in as guest. This means that some items may be
hidden. To view all items, click
Sign In
and enter
admin
as user name and the
ACCESS KEY
printed on the product label
of your TG588v v2 as password.
Step 2:
Check you Internet connection
Under
Internet Access
, check the status of your Internet connection. If it is not connected, click
Internet Access
, enter the
Username
and
Password
for your Internet connection and then click
Save
.
Step 3:
Configure your wireless access points
1
Click
Wireless
. The
Wireless
page appears.
2
Change the following settings under
Access Point
:
a
In the
SSID name
box, type the network name that you want to use for this access point (if you do not want to use the
default one).
b
In the Security Mode list under Access Point, select the security mode that you want to use for this access point. We
recommend to use
WPA+WPA2-PSK
.
c
In the
Wireless Password
box, type the wireless key that you want to use for this access point. The key must consist of
8 to 63 alphanumeric characters. For example: MyKey123.
3
Click
Save
.
4
Reconnect your wireless client(s) to the TG588v v2 using the new wireless settings.
Do not use WEP or None, since they are not secure.
WPS will be disabled if you select WEP.
NickDJ.co.uk
