WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER.
THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to
the presence of dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to humans.
Users should exhibit extra safety when this symbol appears in this instruction manual and follow all precautions
as they are stated.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in this manual.
1- Read these instructions.
2- Keep these instructions.
3- Heed all warnings.
4- Follow all instructions
5- WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or
operate this product near any liquids.
6- Clean only with a dry cloth.
7- Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other
apparatuses (including amplifiers) that produce heat. Keep this product in a well ventilated area.
8- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two blades and a round grounding prong. The wide blade or third
prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician for the
replacement of the obsolete outlet.
9- Protect all the wires connected to this unit from being walked on or pinched, particularly plugs and the point
where they exit from the unit. When removing the cord from the power outlet, remove it by holding the plug, not
by pulling the cord.
10- Unplug the unit during lightning storms or when unused for long periods of time.
11- When wiring this unit and all other equipment used in connection to this unit make sure that all of your
equipment is turned OFF.
12- Once installation and wiring is complete power on all your equipment with the volume and level
controls turned DOWN. Once all the equipment in ON slowly raise the volume or level controls to their
proper positions.
13- Before Placing, Installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets,
transducers, brackets and associate equipment for damage. Any missing, corroded, deformed, or non-load
rated component could significantly reduce the strength of the installation, placement or array. Any such
condition severely reduces the safety of the installation and should be immediately corrected. Use only
hardware which is rated for the loading conditions of the installation and any possible short-term, unexpected
overloading, Never exceed the rating of the hardware or equipment.
14- Consult a licensed, Professional Engineer regarding physical equipment installation, Ensure that all local,
state and national regulations regarding the safety and operation of equipment are understood and adhered to.
15- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Introduction
Congratulations and thank you for your purchase of this Technical Pro Powered PA System
with wireless handheld microphone, USB & SD Card inputs. To get the most from your system, we recommend
you review all the information provided in this instruction Manual.
You will see it on page 2 (rear board)
-
1
-
