LGMEGAx Rear Panel
1. DMX Mode Indicator: The LED will turn red to indicate that the unit is connected to a DMX controller
2. Sound-Activated Mode Indicator: In sound-activated mode, the LED will turn green indicate that the unit is
operating in sound activated mode
3. AUTO Mode Indicator: In Auto mode, the LED will turn blue to indicate the unit is operating in Auto mode
4. Slave Mode indicator: In slave mode, orange indicate light on
5. Function: Press this button to change the function
6. UP Button: press this button to increase the number on the display screen. Press and hold down this
button to rapidly increase the number.
7. DOWN Button: Press this button to decrease the number on the display screen. Press and hold down this
button to rapidly decrease the number.
8. Enter Button: Press this button to save your settings to memory.
9. Microphone: This built-in microphone will pickup any sounds when the unit is being operated in
sound-activated mode. The fixture will illuminate changes according to the sound.
10. Sensitivity Knob: Use this knob to adjust the sensitivity of the lights when the fixture is operating in
sound-activated mode.
11. DMX Output (XLR): DMX (Digital Multiplex) is the form of communication between controller and fixtures.
When linking multiple LGMEGAx units simply connect the DMX Output to the DMX Input on the next unit.
12. DMX Input (XLR): DMX (Digital Multiplex) is the form of communication between a DMX controller and the
fixtures. Connect the DMX output from the controller to this input. When linking multiple LGMEGAx fixtures
connect the DMX Output to the DMX Input on the next unit.
13. Laser Function: This is the safety lock for laser
14. Remote: This is the interlock for remote to control the power off
15. Power Input: Connect the power cable to this input to power the unit on. When linking multiple units
connect the power output to the power input on the next unit.
16. Power Output: When linking multiple units connect the power output to the power input on the next unit.
LGMEGAx
