Technical Parameter:
Master / Slave Settings
When two or more fixtures are connected via DMX connectors the fixtures can be programmed to allow one fixture
(master) to control the other fixtures (slave). In this setup making a change to the master fixture would change all the
slave fixtures as well.
Set the master fixture to the desired setting. Then set ALL of the slave fixtures to d001.
Note: When using the master / slave setup only ONE unit can act as the master. ALL other fixtures must be set to d001.
When using the master / slave setup the fixtures can’t be connected to a DMX controller as it would interfere with the
master / slave settings.
Dimension
10
’’X9’’X10’’
Power
AC in/out
Rang
100-240V 50/60HZ
rate
66W
Fuse
1.6A
Type
Class 3B laser diodes/LED chip
Quantity/color
1/red 1/green
Laser power rate
100mw 50mw
Wave length
650nm 532nm
Quantity/color
1/red, 1/green, 1/blue, 1/orange, 1/white, 8/white
LED power rate
3W 3W 3W 3W 3W 1W
Max temperature
104°F(40
℃
)
Cool system
Fan
Auto
6 modes
Sound
6 modes
DMX channel
8CH
LGMEGAx
