Technica Engineering 100base-t1_SPY Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 43

Technica Engineering 100base-t1_SPY Скачать руководство пользователя страница 40

Page

39

of

43

9.

The user can re-activate your Windows firewall after successful update.

.
.
.
--------------------------------------------------------
C:\_Altera_SPY2\Calypso_FW\100BASET1_SPY-Release-v1.1
Connect new device. Make sure firewall is disabled.
--------------------------------------------------------
Drücken Sie eine beliebige Taste . . .
Process started.....
========================================================
Old Bootloader Version:
========================================================
Connecting to 192.168.0.49:9000 (1).
Connected
Sending ^C
Non-certified release, version 2.0 - built 09:57:49, Jul 28 2015
Connecting to 192.168.0.49:9000 (1).
Connected
Sending ^C
Testing TFTP server
tftpServer ready. Port: 69
tftpServer: 127.0.0.1 requested file redboot-updater.srec
[****************************************]
TFTP transfer finished
TFTP server ok
Loading test file...
tftpServer: 192.168.0.49 requested file redboot-updater.srec
[***********************TFTP transfer finished
Test File loaded successfully
Updating application
Erasing flash...
Flash erased
Loading file...
tftpServer: 192.168.0.49 requested file redboot-updater.srec
[****************************************]
TFTP transfer finished
File loaded successfully
Run application...
Connecting to 192.168.0.49:9000 (1).
Connected
Sending ^C
Testing TFTP server
tftpServer ready. Port: 69
tftpServer: 127.0.0.1 requested file redboot.srec
[****************************************]
TFTP transfer finished
TFTP server ok
Loading test file...
tftpServer: 192.168.0.49 requested file redboot.srec
[************************TFTP transfer finished
Test File loaded successfully
Updating redboot
Erasing flash...
Flash erased
Loading file...
tftpServer: 192.168.0.49 requested file redboot.srec
[****************************************]
TFTP transfer finished
File loaded successfully
Run application...
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
NEW Bootloader Version:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Connecting to 192.168.0.49:9000 (1).
Connected
Sending ^C
Non-certified release, version 2.0 - built 17:04:51, Aug 19 2015
Connecting to 192.168.0.49:9000 (1).
Connected
Sending ^C
Testing TFTP server

«
...
38
39
40
41
42
...
»

Содержание 100base-t1_SPY












































Отзывы:

Нет отзывов