Page
14
of
43
5.4.2
Spy Multiplexer
Click on the central „Spy“ label to configure general
Spy Multiplexer
settings.
Enable header for logging ports:
This option enables the Header Mode of the 100BASET1_SPY.
For BroadR-Reach Ports the original Ethernet frames will be wrapped in a new Ethernet Frame. This
new frame will contain additional data (timestamp, ingress port, …) and the original RAW frame. The
new Frame will be transmitted through the selected Gigabit Port. See frame format information in
Chapter 6.
For CAN, LIN and FlexRay frames the wrapper is necessary for the data to be recognized as Ethernet
frame.
Note:
When the user makes any change in the configuration of any port, the
Save Configuration
option will appear. Select the
Restart after saving
option before saving configuration.