Technibel MSW 3, Руководство по установке

Страница: 12 / 44

4
F
GB
I
E
D
4 - CONNECTIONS
4.1 - HYDRAULIC CONNECTION
4.1.1 - GENERAL
• Connection type : 1/2" G male.
• Connection of exchanger outlet
connections inside the device.
• Remove the air treatment cover to
gain access.
3.3 - HOOKING OF THE INTERNAL UNIT
A B
A - Remove the foam packing-pieces in
the baffle.
B - Remove the unit's cover and connect
hoses, as required (Accessory item.
See corresponding installation
documentation).
C - Hook the air handler on the support
plate according to the opposite sketch.
Connect the water pipes (see
paragraph 4).
Run in any electric cables (see
paragraph 4).
D - Then, press on the bottom of the unit in
order to engage the bottom hooks in
the holes in the support plate.
E - In order to unhook the unit from the
support plate, push the unit upwards
and pull it towards you. The hooks are
then released from the support plate.
C D
E
Hooking
Unhooking
Water outlet
connection
Water inlet
connection
4.1.2 - INSTALLATION
• 5 possibilities t u b e o u t l e t
orientation:
- For orientations 1 and 3 , cut
the plate (in order to put the
pipes through leaving the
contour free from any
roughness).
- Keep the piece of plate cut for
possible later use.
Cover
2
1
3
4
5
• Before mounting the device on the
plate, connect the insulated
connections (not supplied) and the
condensate outlet tube.
• Install them, if necessary, in the
housing provided for this purpose.
Leave the installation flush along
the front.
Insulation on connections
Pipes
Electrical cables
(if applicable)
Condensate
pipe
Insulating sleeve
installation side
1/2" G male
1/2" G male
air handler side
1/2" G female
1/2" G female
Length
(mm)
Connections
MSW 3
●
●
Code
• Sets of 2 flexible tubes with their
connections and insulation are
proposed on option.
• For tube outlet orientations 1 and
2 (left side), it is necessary to use
longer flexible tubes.
K 60 L 060 Z
K 60 L 059 Z
550
1 250
• To aid assembly (and possible disassembly of the device), and to avoid transmitting vibrations, we recommend using flexible
tubes.
Clamp