GB
19
6 - ACCESSORIES
VALVE KIT - CODE 70600088 - CAW 3-4-5
• The valve kit includes:
- the valve body,
- 2 swivel couplings,
- actuator (with 230V “On/Off” heating element).
• Assembly
A - Valve directly on the unit’s hydraulic
connections
• Screw the “2 part” portion of the swivel
coupling on the female coupling of the unit.
Use a stepped spanner or a hex wrench. Put
sealing compound or Teflon tape on the threads.
Important: Hold the unit’s couplings with a
wrench while tightening to avoid twisting
the tubes inside the unit.
• Screw the “1 part” portion of the swivel coupling
onto the valve threads.
Use sealing compound or Teflon on the threads.
Female couplings
of the unit
Swivel coupling
(“2 parts” portion)
Swivel coupling
(“1 part” portion)
Valve
• To install the facade:
- Turn the two locking clips (5) downward.
- Attach the frame of the facade (6) to the unit with the two hooks
(7) by lining them up with the locking clips (5).
Note (for CAW 6-8-10 models)
- Observe the position of the facade frame as the hooks are
not the same size. Correctly present them in front of the
corresponding locking clips.
- Check the correct position of the facade frame in relation to
the false ceiling. Adjust the position of the internal unit, as
required.
- Secure the facade frame to the unit using the special screws and
washers (8) provided.
- Fit the grille (3) making sure that the filter (9) is correctly installed.
- Hook the grille safety cord to the frame, close the grille and
replace the lock retaining screws.
5
8
6
7
9
3
5
5 - FRAME / GRILLE INSTALLATION
• The frame / grille comes in a separate box.
- Code K70N145T for CAW3-4-5
- Code K70N146T for CAW6
- Code K70N147T for CAW8-10
• Before installing the facade:
- Remove the retaining screws (1) from the locks (2) on each side
(remember to replace these screws after installation).
- To open the grille (3), turn the two locks (2) in the direction of the
arrow.
- Open the grille (3) 45°.
- Detach the safety cord (4) from the frame (remember to replace it
again after installation).
- Pull the grille inward to remove it from the frame.
1
3
4
2
3742551181-I-TEC-CAW-GB.indd 19
3742551181-I-TEC-CAW-GB.indd 19
27/01/2015 13:55:37
27/01/2015 13:55:37
