GB
9
55
60
ø112
X
A
4 holes ø 3,1
X
220
250
Model
CAW 6
CAW 8-10
CAW 6-8-10
• The unit can be connected to an outside air inlet conduit.
- Open the knock-out (A), secure a connection sleeve (not supplied) to the unit and connect a thermal
insulated conduit.
- On the exterior, install a grille with filter to prevent drawing in dust and debris which could clog the unit’s
exchanger.
18
17
135
135
ø 90
ø 70
ø 2.9
90
°
0'
4.4 - ELECTRICAL CONNECTION
4.4.1 - Generals
• The electrical connection conduits must be fixed.
• Class 1 appliance.
• The electrical installation must be carried out in
compliance with the rules in force (especially NF C
15-100
CEI 364).
4.4.2 - Detail of the connection
• Remove the cover of the electrical box.
• Cable clamps are provided to maintain the cable at
their entry point into the box.
• Connect the cables to the terminals provided.
• Make sure that the wires are correctly connected
to the terminals. Incorrect connection can cause
operating problems as well as overheating which
can cause fires.
• When replacing the box’s cover, be sure not to
pinch the cables.
Electrical cable
passage
Cable inlet into
the unit
Electrical box
cover
CAW 3-4-5
CAW 6-8-10
3742551181-I-TEC-CAW-GB.indd 9
3742551181-I-TEC-CAW-GB.indd 9
27/01/2015 13:55:35
27/01/2015 13:55:35
