6
Basic Reference
Dip Switch
3 Pin Male
XLR Data
3 Pin Female
XLR Data Out
Mounting Bracket
Fuse Holder
Power Input Cable
Setup and Operation Modes
The following refers to the different modes that are available on this fixture via the Dip Switch
Settings. Each mode is selectable by setting the dip switch combination from the information
below. The DMX mode requires data interconnect cables and a controller to be used. The
stand-alone mode does not require any data cables to be connected.
Dip switch
Stand-Alone Mode
DIP 1, 2, 3, 4:
Set intensity levels by combining Dips 1-4 in the On position.
Dip 1
On equals 25% output.
Dips 1 and 2
On equal 50% output.
Dips 1, 2, and 3
On equals 75% output.
Dips 1, 2, 3, and 4
On equals 100% output.
