Techni-Lux DE-Spider810, Быстрый старт

Страница: 6 / 13

6
Setup and Operation Modes
The following refers to the different modes that are available on this fixture via the Control Panel
display. All functions are selectable from the display menu of the fixture.

Auto Mode: The unit will automatically chase through the different colors and
movements.

Sound control - The unit will react to sound, chasing through the built-in programs.

DMX Mode: Control of all functions with a standard DMX 512 controller.

Master/Slave Mode: One unit will be a Master in the one of the above three modes, other
units in the chain will work in synchronization with the designated master (1
st
unit in link).
Note:

Must set fixture be MASTER and confirm SOUND be ON to activate Music control
function

Must set fixture be MASTER to activate Stand-alone mode
DMX Mode:
Operating through a DMX controller gives the user full control over all effects and
the freedom to create custom programs. To run unit in DMX mode, connect data via the 3 pin
XLR connection to any standard DMX controller. Set desired DMX start address following the
setup specifications that come with your DMX controller.
1. This function will allow you to control each individual unit
’
s traits with a standard DMX 512
controller.
2. The unit has two DMX Modes: 7Channel or 12Channel. Please see “DMX
channels/function/ description/ value” for the DMX traits.
Control Panel Menu
Control Panel Menu Table
Button Function
<MENU>
Scrolls through the main menu and exits from the
current menu or function
<UP>
Navigates upward through the menu list and
increases the numeric value when in a function
<DOWN>
Navigates downward through the menu list and
decreases the numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the
currently selected value in to the current function