04/2019 - AE/V1.16
12
Technetix Group Limited
Rear mounting direct to cabinet back panel
For mounting directly onto a cabinet back panel, the rear 0�25”
(
6 mm
)
bolt holes can be used with
two 0�25” (6 mm) threaded bolts (see following picture)� When using this method of mounting, ensure
that the bolts’ threaded part are no longer than 0�25” (6 mm) in length when protruding through the
back board on which the amplifier is mounted� The bolt total length dimension to be used is 0�25”
(6 mm)
+ back board thickness dim washer thickness dimension�
DBC-1200S
Housing
0�25” (6 mm)
MAX
Back board
material
thickness
Washer
thickness
dimension
Housing 0�25” (6 mm) threaded
bolt holes at 12�2” (310 mm) centers
