technetix AIMA3000.FT5X, Руководство пользователя

Страница: 23 / 52

AIMA3000.FT5X Product User Manual
Technetix Group Limited
sales@technetix.com • technetix.com May/2016 - Version 1.0 23
DO NOT remove the dust cap from the fibre connector until right before connecting it to the input port.
4. Raise the clip, insert the fibre connector, and then lower the clip over the connector.
When using the sliding guide, put the fibre connector in the clip and slide it in from the rear to the front, through the
chassis. Ensure that the optical fibre tail does not become trapped or pulled tightly.
Fibre clip (at rear, for up to two connectors) Handle (at front)
5.4.2 Using the Fibre Tray
All optical fibres must be organised in a tidy manner in the chassis’s fibre tray, which provides enough space for up to 64
optical fibres. This allows for easy positioning and future replacement of optical fibres. Along the front of the chassis, there
are cut-outs for keeping the optical fibres in position.
1. When organising the optical fibres, lift up the metal flap at the rear of the panel above the sliding guide. This will
allow fibre cables to be moved away from the sliding guide rails.