Techne Touchgene Gradient, Руководство оператора

Страница: 30 / 41

T o u c h g e n e G r a d i e n t O P E R A T O R ’ S M A N U A L
PAGE 30
Typical Program Printout
From the “Program” screen you
can print the program by
touching the ‘Print’ key. A
typical print-out is shown
below.
Program “Your own”
Last Modified 19/08/98 14:16:43
Heated Lid Disabled
Heated Lid before program Off
Pause before program Off
Initial denaturation Disabled
Hot Start 05m00s 72.0
°
C
Final extension Disabled
% &
Copy Delete Edit
Run Print Exit
TOUCHgene program 02/12/98 08:29:44
System Version :0.49 1.00
TOUCHgene Serial Number : 88192/01
Program : DEPT PROGRAM
Date last edited : 12/10/1998 22:48:11
Auto Restart : Enabled
Password Protection : Disabled
Heated Lid : Enabled
Initial Denaturation : Disabled
Hot Start : Disabled
01 Cycles
Set Point
°
C RampRate
°
C HoldTime
Segment 4.0 Max 00:10:00
03 Cycles
Set Point
°
C RampRate
°
C HoldTime
Segment 95.0 Max 00:00:30
Segment 55.0 Max 00:00:30
Segment 72.0 Max 00:01:00
either or
RUNNING A PROGRAM
From the “Select program”
screen you will go into the
“Program” screen for the
program selected.
Alternatively, from the
“Editing” screen you will go
back into the “Program” screen
when you ‘Save’ or ‘Save as’.
From the “Program” screen
when you touch ‘Run’ you
will be asked if you wish to
data log the run.
If you answer ‘Yes’ then you
will be asked to give the data
log a name. For printing out
the data log and so on see a
later section on page 32.