T o u c h g e n e G r a d i e n t O P E R A T O R ’ S M A N U A L
PAGE 16
System User Main Menu
Programs
By touching this button you
can access all the programs
stored either internally or in the
memory module, see page 18.
Program defaults
By touching this button you
can set up the program defaults
for a number of programs. See
below.
Data Logs
By touching this button you
can access the data logs stored
in the plug in memory module.
See a later section of this
manual, pages 32 and 33.
Gradient Calculator
See page 26.
Exit
By touching this button you can return to the previous screen.
Program Defaults
When you touch this button you can set up default settings for the programs you are about to put into the
unit.
If you touch the button for a field where there is either ON or OFF then the field will toggle between the
two. For example:
Pause before program Off
One touch gives:
Pause before program On
A second touch will return the
field to the first example.
If you touch a button where
there is a numerical input it
will transfer you to an input
screen. An example is given
on the following pages.
If you touch the ’
&
’ down
arrow button the screen will
toggle down to a maximum of
four more fields as shown on
the next screen. You can then
toggle back using the ’
%
’
up
arrow button.
Techne
Touchgene Gradient
Programs
Program
defaults
Data Gradient
Exit
Logs
Calculator
Set program Defaults
Heated Lid
Off
Heated Lid before program
Off
Pause before program
Off
Initial denaturation 05m00s
94.0
°
c
Hot Start
94.0
°
c
%
&
Exit
