11
Model: TX-201/202 Article No. 5010/5011, 08/2022
Notice: Do not put the device into the oven, or directly heat the device by
other means to avoid danger!!!
DC does not
charge (Car /
Solar /
Adapter
Please check if the charging voltage meets the device requirements:
(Car/Solar charging DC charging voltage requirements 11-30VDC
Please check if the indicator light on the power adapter is on, if not, please
check:
Is the adapter connected,
Whether the AC socket is normal, and whether the AC mains is normal;
(Note: The inspection requires professionals and professional equipment
to avoid electric shock)
Battery high temperature or low temperature protection, please refer to the
corresponding method.
No AC output
Check that the AC switch is on. (On: the green indicator light on the button
is on, off: the indicator light is off)
Check whether the load device is connected to the AC output
The equipment is overloaded or short-circuit protected. After reducing the
load or eliminating the fault, it can be restored after restarting.
Battery under-voltage protection, need to be charged before use; AC switch
should be turned off and then turned on.
Cigarette
lighter, DC
Ports, USB,
TYPE-C no
output
Whether the DC switch is on. (On: the green indicator light on the button is
on, off: the indicator light is off)
Check whether the green indicator on the switch button is flashing. If it
flashes, it may be caused by overload or short circuit or over temperature of
the DC module. After checking and troubleshooting, it can return to normal.
Overload recovery: reduce the load to within the rated range,
Short-circuit recovery: check the load equipment and eliminate the short-
circuit fault,
Module over-temperature recovery: suspend use and resume after cooling.
Battery under-voltage protection, need to be charged before use
Battery high temperature or low temperature protection, please refer to
the corresponding method
LED light
does not light
up
Whether the LED switch is on. (On: the green indicator light on the button is
on, off: the indicator light is off)
Battery under-voltage protection, need to be charged before use
Battery high temperature or low temperature protection, please refer to
the corresponding method
LCD not
responding
Battery high temperature or low temperature protection, please refer to the
corresponding method
If the battery is seriously short of power, charge it through the battery rescue
port until the LCD screen is lit, and then fully charge it in the usual way
Example of usage
TX-201 300W
TX-202 600W
Min. loading time
45 min.
