9
Model: TX-201/202 Article No. 5010/5011, 08/2022
discharged with a power of 50W, the display shows less than 50W
charging power. This happen because of a priority connection of the
input power circuit, this input power get directly used to operate the item
on the 230V output port.
If the output power is bigger than the input power you may see that the
Display show a smaller number of consumed power, e.g. charge with
100W, discharged power is 200W, the display show ~100W on the
output Display.
How to charge the device
The battery power of the energy storage power supply will be consumed
during use. You can choose the following methods to charge the energy
storage power supply Note: All models do not support multiple
charging methods at the same time, only one of them can be selected for
charging.
By AC-Adapter
Connect the AC plug cord
to the adapter
Insert the adapter DC output plug
into the device charging port
Insert the adapter AC plug
into the mains outlet
By Car Adapter
Insert the DC output plug
into the device charging
port
Insert the car
cigarette lighter
plug into the car
cigarette lighter
By Solar panel
Make sure the solar panel output is in the range of the allowed input parameter (see table
above) we suggest to use the 100W Solar Panel TX-206 foldable Solar Panel or TX-208
