Template version:1
8/15
6. TAKING YOUR BLOOD PRESSURE READING
a. After applying the cuff and your body is in a comfortable
position, press the “START” button. A beep is heard and all
display characters are shown for self-test. You can check the
LCD display according to the right picture. Please contact the
service center if segment is missing.
b. If the monitor has stored results, the LCD will
momentarily display the most recent one. If no
result has been stored, zero will appear on LCD.
c. Then the monitor inflates the cuff until sufficient pressure has
built up for a measurement. Then the monitor slowly releases
air from the cuff and carries out the measurement. Finally the
blood pressure and pulse rate will be calculated and displayed
on the LCD screen. The blood pressure classification indicator
and Irregular heartbeat symbol (if any) will blink on the screen.
The result will be automatically stored in the monitor.
d. After measurement, the monitor will turn off automatically after 1 minute of no
operation. Alternatively, you can press the “START” button to turn off the monitor
manually.
e. During measurement, you can press the “START” button to turn off the monitor
manually.
Note: Please
consult a health care professional for interpretation of pressure measurements.
7. DISPLAYING STORED RESULTS
a. In Clock Mode, press “MEM” button, the last result
will be displayed with date and time. Irregular
heartbeat symbol (if any) and the indicator of blood
pressure classification will blink at the same time.
Press “MEM” button repeatedly to review the
results measured previously.
b. When displaying the stored results, the monitor will turn off automatically after 2
minutes of no operation. You can also press the button “START” to turn off the monitor
manually.
8. DELETING MEASUREMENTS FROM THE
MEMORY
When any result is displaying, keeping on pressing
