Tech Source RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND, Инструкция по установке и справочник

Страница: 22 / 64

Raptor Drivers for Linux Installation and Reference Manual
3-8
3.6.4 ServerLayout Section
This is the section which specifies the server layout for either
single-screen or multi-screen configuration.
This section is not modified automatically by the installation. It
must be modified for your specific configuration.
The following example shows the
ServerLayout
Section for a
single-screen configuration on the Raptor device.
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Raptor2000" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Assuming
Screen0
is the console card, the following example
shows the
ServerLayout
section with the Raptor card as the
second screen.
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" LeftOf "Raptor2000"
Screen 1 "Raptor2000" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
NOTE: The
ServerLayout
section should already exist in
your
XF86Config
file. It must be modified manually to
include the Raptor card.
NOTE: For the Raptor Drivers to work properly, NO other
cards using the XF86
i128
driver should be specified in
the
ServerLayout
section. This limitation is due to the
fact that the XF86
i128
driver will claim all i128 based
cards. Since the
i128
driver will not initialize the Raptor
card correctly, the Tech Source driver must be used.