Tech Source RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND, Инструкция по установке и справочник

Страница: 39 / 64

Chapter 5 – Invoking The X Server
5-7
5.6.2 Setting Bit-Depth on T-Class Cards
The T-Class cards support the 8-bit, 24-bit, 8+24-bit, 8+8,
mox16, mox24 and mox32 modes. Radar Scan capable
versions of T-Class cards additionally support mox16radar,
mox24radar and 8radar. By default these cards start up in 8-bit
mode.
These modes can be selected by modifying the
Device
section
and
Screen
section of the
XF86Config
file appropriately.
To set bit-depth to 8-bit, the
"Mode"
option in the
Device
section needs to be set to 8 and the other values should remain
unchanged.
To set bit-depth to 24, the
"Mode"
option needs to be set to
"24"
as shown:
Section "Device"
Identifier
"Raptor1.1KT"
Driver "rapt"
Card "TSI Raptor 1100T"
BusID "PCI:0:12:0"
Option "Device" "/dev/rap1kt0"
Option "Mode" "24"
Option "ScaleCursPos" "on"
EndSection
To select 8+24-bit mode, the
"Mode"
option should be set to
8+24
as shown in the following example. In this case the default
visual is 8-bit
PsuedoColor
.
Section "Device"
Identifier
"Raptor1.1KT"
Driver "rapt"
Card "TSI Raptor 1100T"
BusID "PCI:0:12:0"
Option "Device" "/dev/rap1kt0"
Option "Mode" "8+24"
Option "ScaleCursPos" "on"
EndSection