Tech Controllers ST-280, Руководство пользователя

Страница: 16 / 24

ST – 280 user’s manual
16
PIN Code
In order to set the PIN code (necessary for regulator
operation when the lock is active - you must click PIN code
icon
NOTE
The factory set PIN code is "0000".
VI.c) Screen
After clicking on the Screen icon on the main menu you will see the panel used for changing the
screen settings.
Screensaver
On the controller, it is possible to set the screensaver which will activate after a fixed idle time. In order
to return to the main screen view it is enough to touch any place on the screen. The user may adjust
the screen view during the screen time-out by setting particular parameters:
 Screensaver selection
By clicking selection of the screensaver you switch to the panel which enables you to turn off the
screensaver option (No screensaver), or set the screensaver in the form of:
-slideshow – (activation of this option is possible only after prior activation of the photos import option).
Photos are displayed on the screen with a frequency set by the user.
-Timer – visible on the screen.
Time-out – after expiration of the set idle time, the screen will switch to stand-by function.
 Import of Photos
Any photos you want to import to the controller's memory
must be first prepared by means of using the ImageClip
program (download from www.techsterowniki.pl).
After installation and starting up the program on a PC, you
will be able to load your selected photos. You can also select
the area of the photos to be displayed on the controller
screen. You can turn photos. After processing the selected
photos, the program will load them. After preparation of all
the photos you want to load to the controller, save them on
a USB stick in the main menu. Insert the USB stick into the
USB port on the controller and launch the photos Import
option on the controller menu.
You can load up to 8 photos at any one time. Loading new
photos automatically into the controller memory will
remove previous photos
 Idle Time
This function enables you to set the time after which the screensaver will activate.
 Duration of the Slide
This option enables you to set the frequency with which photos will be changed if the slideshow is
activated.
Screenshot of the photo-editing program intended for
ST-282 controller