8
1.
Flue gas temperature (displayed only if a flue gas sensor is used in the main controller).
2.
Current time and day of the week - tap here to edit time settings.
3.
Icon indicating that alarm clock function is active.
4.
Icon indicating that weekly control function is active.
5.
Enter controller menu.
6.
Valve 1 temperature: current and pre-set value - tap here to edit the pre-set temperature of valve 1.
7.
Valve 2 temperature: current and pre-set value - tap here to edit the pre-set temperature of valve 2.
NOTE
In order for the room regulator to display the valves parameters, it is necessary to activate and register them (if
external valve modules such as ST-431N are used). If the valve is not active, the room regulator screen displays
„!”.
8.
Water tank 1 temperature: current and pre-set value - tap here to edit the pre-set water tank temperature.
9.
Circulating pump icon – animated icon indicates that the pump is active.
10.
DHW pump icon – animated icon indicates that the pump is active.
11.
CH pump icon – animated icon indicates that the pump is active.
12.
CH boiler temperature – current and pre-set value. If three values are displayed, it means that weekly control is
active and the third value refers to pre-set temperature correction. Tap here to edit the pre-set temperature of
CH boiler.
13.
Level of fuel in the feeder.
14.
External temperature (displayed only if external sensor is used in the main controller).
15.
Room temperature – current and pre-set value. If three values are displayed, it means that weekly control is
active and the third value refers to pre-set temperature correction. Tap here to edit the pre-set room
temperature.