7
V.
HOW TO USE THE CONTROLLER
1.
PRINCIPLE OF OPERATI ON
The regulator sends a signal to the main controller informing if the pre-set temperature has been reached. Depending on
particular settings, reaching the pre-set temperature may result in e.g. CH pump deactivation, pre-defined decrease in
the pre-set CH boiler temperature (main controller settings). The room regulator also enables the user to change certain
settings of the main controller e.g. the pre-set CH boiler temperature, pump operation modes etc.
2.
MAIN SCREEN DESCRIPTION
The controller is equipped with a large touch screen. It displays the current status of basic CH boiler parameters.
Depending on the user’s preferences, the display may show the heating system (installation) screen or panel screen.
Parameters displayed in the main screen view of the room regulator depend on the main controller settings and its type.
NOTE
Each change of the pre-set temperature, time or any other parameter in the room regulator or CH boiler
controller results in new settings being introduced in both devices.
NOTE
Installation view is the default main screen view. The user may change it into panel view.
A)
MAIN SCREEN DESCRIPTION - INSTALLATION SCREEN
1
15
2
5
4
3
14
6
8
7
9
13
12
11
10
