4. DIP SWITCH FUNCTION
EO18-13004
4.1 DIP Switch
4- 1
4. DIP SWITCH FUNCTION
The DIP switch locates under the DIP switch cover.
Open the printer cover. Then, remove the receipt roll and DIP switch cover.
The function of each DIP switch is shown below.
NOTE: DIP Switch 3 is provided on the serial interface model only.
4.1 DIP Switch
4.1.1 DIP Switch 1
No. Function
ON
OFF
Default
1-1
Auto cutter
With cutter
Without cutter
ON
1-2 Reserved
---
---
OFF
1-3
Paper width
58 mm
80 mm
OFF
42 (80 mm paper)
48 (80 mm paper)
1-4
Printing columns
30 (58 mm paper)
36 (58 mm paper)
OFF
1-5 CR
mode
LF
Ignored
OFF
1-6
Input buffer
72 bytes
4K bytes
OFF
1-7
ON
1-8
Print tone (Refer to the table below.)
OFF
NOTE: The printing columns differ depending on the paper width (DIP Switch #1-3).
Print tone
Print tone
Level 1
Level 2
Level 3
Level 4
DIP Switch 1-7
OFF
ON
OFF
ON
DIP Switch 1-8
OFF
OFF
ON
ON
NOTES:
1. When the print tone is set to Level 2 or above, the printing speed may become slower.
2.
As the level number gets bigger, the print tone becomes darker.
Fig. 4-1
DIP Switch Cover
