TEC FS-2700 Скачать руководство пользователя страница 96

Страница: 96 / 148

Guest Check Functions

FS-2700 Owner’s Manual

3-54

3.12.2 Change a Discount

Procedure

1. Index the number of the closed check.

2. Press

{RECALL~CHECK}

3. Check displays on the screen.

4. Press

{VOID}

5. If prompted, index a manager I.D. number and press

{TOTAL}

6. Use the up and down arrow keys to highlight the discount.

•

NOTE: Highlighting an item discount will also highlight the
item to which it was applied.

7. Press

{VOID}

again. The discount is removed from the check.

•

NOTE: Voiding an item discount also voids the item to
which it was applied.

8. Enter the correct discount to the check.

9. Press

the

{MEDIA}

key originally used to tender the check.

10. If the check total is less than the original total, the screen

prompts:

Refund?

11. Index

{1}

to refund the amount of the voided items.

Содержание FS-2700





















































































































































Результаты поиска

Содержание FS-2700

Отзывы:

Бренды по названию

Популярные бренды

TEC FS-2700, Руководство пользователя

Результаты поиска

Содержание FS-2700

Отзывы:

Бренды по названию

Популярные бренды