TEC FS-2700 Скачать руководство пользователя страница 61

Страница: 61 / 148

FS-2700 Owner’s Manual

Guest Check Functions

3-19

3.3.10 Remove Items from Checks

Remove Last Item

1. Enter menu items.

2. Press

{LAST~ITEM~VOID}

3. The last menu item entered on the check is removed.

Remove One Item

Before an item has been sent/stored, the security level in the

Function Setup table only applies if the option SEC EC VOID in
the System Config. table is set (page 10 #1).

After a menu item has been sent/stored and the check recalled,
the

{VOID}

key can only be used according to the security level

set in the Function Setup table.

Procedure

1. Enter menu items.

2. Press

{VOID}

3. If prompted, index a Manager Code and press

{TOTAL}

4. Use the up and down arrow keys to highlight the item to be

removed from the check.

•

Highlighting a primary Menu Item automatically highlights the

item’s modifiers.

5. Press

{VOID}

. The item is removed from the check.

Содержание FS-2700





















































































































































Результаты поиска

Содержание FS-2700

Отзывы:

Бренды по названию

Популярные бренды

TEC FS-2700, Руководство пользователя

Результаты поиска

Содержание FS-2700

Отзывы:

Бренды по названию

Популярные бренды