TEC FS-2700 Скачать руководство пользователя страница 50

Страница: 50 / 148

Guest Check Functions

FS-2700 Owner’s Manual

3-8

3.2.5 Override Meal Period

Meal Period times are set up for each day of the week in the Meal
Period Setup table. The current setting can be overridden for the

current check only or for all checks until the System Z report is done.

The change can affect one terminal or all terminals.

For One Check Only

1. Press

the

{MEAL~PERIOD~#}

key wanted for this check.

•

The override setting reverts to the programmed Meal Period
setting after the check is sent.

All Checks Today

1. Press

{STAY~DOWN}

2. Press

the

{MEAL~PERIOD~#}

key wanted.

3. Screen

prompts:

Broadcast changes?
1 – Yes, 0 - No

4. Index

{1}

and press

{TOTAL}

for the change to be effective at all

stations in the system.

Index

{0}

and press

{TOTAL}

for the change to affect this station

only.

•

The override setting will be effective until the Meal Period is
changed again, or until the next System Z report is done.

Содержание FS-2700





















































































































































Результаты поиска

Содержание FS-2700

Отзывы:

Бренды по названию

Популярные бренды

TEC FS-2700, Руководство пользователя

Результаты поиска

Содержание FS-2700

Отзывы:

Бренды по названию

Популярные бренды