TEC BRST-10 SERIES Скачать руководство пользователя | Manualshive

Страница: 23 / 28

background image

8-2

8. REPLACING THE HEAD UNIT/ INK CARTRIDGE

EO1-13013

2

1

8. REPLACING THE HEAD UNIT/ INK CARTRIDGE

5. Unpack a new head unit/ ink cartridge. Remove the protection pad from the head unit/ ink cartridge.

1

6. Remove the protection sheet from the head unit/ ink cartridge.

2

NOTES: 1. Do not touch the area that had been under the protection sheet with your fingers or with any

object.

2. To avoid the head unit/ ink cartridge from which the protection sheet has been removed from

getting dry, install it into the printer as soon as possible after removing the protection sheet.

3. Do not install the head unit/ ink cartridge with the protection pad and the protection sheet

attached. Doing so will damage the printer.

4. Do not remove the protection sheet while the head unit/ ink cartridge faces down. Also do

not drop or shake the head unit/ ink cartridge. Doing so may cause ink to spill over. Once
ink gets on your clothes, it cannot be removed.

7. Load the head unit/ ink cartridge onto the carriage, and then fully push it until the hook secures the

cartridge. (Refer to 5.2 LOADING THE HEAD UNIT/ INK CARTRIDGE)

Fig. 8-2

Protection pad

Protection Sheet

POWER

FEED

RESET

CART-

RIDGE

SLIP

INKOUT

POWER

ERROR

8. Depress the [CARTRIDGE] switch.

The printer performs the initial operation. After the initial
operation is finished, the carriage returns to the home
position (right end), and the power LED stops blinking and
remains on.

9. Insert the two hooks into the holes on the top cover, and then

close the printer cover slowly. The ERROR LED turns off,
and the printer becomes ready to print.
NOTE: Failure to close the printer cover fully may cause an

error condition.

POWER

FEED

RESET

CART-

RIDGE

SLIP

INKOUT

POWER

ERROR

«
...
21
22
23
24
25
...
»

Содержание BRST-10 SERIES





























Отзывы:

Нет отзывов

Похожие инструкции для BRST-10 SERIES

Бренд: Oki Страницы: 6

Бренд: Oki Страницы: 44

Бренд: Oki Страницы: 13

Бренд: Oki Страницы: 20

Бренд: Oki Страницы: 2

Бренд: Oki Страницы: 28

Бренд: Samsung Страницы: 347

SCX 6555N - MultiXpress Mono Multifunction

Бренд: Samsung Страницы: 180

SCX-4300 - SCX 4300 B/W Laser

Бренд: Samsung Страницы: 18

SCX-4521FG - B/W Laser - All-in-One

Бренд: Samsung Страницы: 215

SCX 6320F - B/W Laser - All-in-One

Бренд: Samsung Страницы: 332

SCX 4828FN - Laser Multi-Function Printer

Бренд: Samsung Страницы: 248

SCX 4725FN - B/W Laser - All-in-One

Бренд: Samsung Страницы: 253

ML 2851ND - B/W Laser Printer

Бренд: Samsung Страницы: 179

ML 2510 - B/W Laser Printer

Бренд: Samsung Страницы: 84

ML 1740 - B/W Laser Printer

Бренд: Samsung Страницы: 152

ML 1630 - B/W Laser Printer

Бренд: Samsung Страницы: 142

ML 1630 - B/W Laser Printer

Бренд: Samsung Страницы: 82

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды