TEC BRST-10 SERIES, Руководство пользователя

Страница: 18 / 28

6-1
6. REPLACING THE RECEIPT ROLL EO1-13013
1
2
3
6. REPLACING THE RECEIPT ROLL
6. REPLACING THE RECEIPT ROLL
To replace the receipt roll and to release a paper jam, the following steps should be followed.
WARNING!
To avoid injury and printer damage, be careful not to catch your fingers or any objects while the
carriage moves right and left in the initial performance.
CAUTION:
1. Use only TOSHIBA TEC specified paper. Use of non-specified paper may lower the print
quality or shorten the cutter life.
2. Set the receipt roll in the correct direction. Failure to do this may cause a paper jam error.
1. Turn the power OFF by pressing and holding the [POWER] switch.
2. Open the printer cover while holding the handle, and remove it. (Refer to Section 5.2 LOADING THE
HEAD UNIT/ INK CARTRIDGE)
3. While pushing the front cover in direction 1 , remove it in direction 2 .
4. Open the paper cover backward.
3
Fig. 6-1
Paper Cover
Front Cover