TEC B-450 SERIES, Руководство пользователя

Страница: 92 / 222

3-6
3. OPTIONAL KIT EO10-33003A
3.6 LAN I/F BOARD: B-7704-LAN-QM
(3) B-7704-LAN-QM Initial Setting before shipment
NOTES: 1. In the TELNET setting, select applicable items from the menu and enter each setting value.
Then selecting [ Save changes to EE_PROM restart CommAssist ] in [ 5) Exit ] performs
EE_PROM writing and restarting the printer.
2. The RS-232C I/F Protocol of the B-7704-LAN-QM should be the same as that of the printer.
Item
Operation Mode
Data format for socket communi-
cation
My IP Address
Sub Net Address
Gateway IP Address
TCP Port No. for communication
by RS-232C I/F
TCP Port No. for communication
by Centronics I/F
Client Connection
Server IP Address
TCP Port no. of server
Connection retry count
Connection Trigger
Disconnection Timer value
Receive Control Timer
RS-232C I/F Protocol
ER Signal
Password for the management
TELNET
Parameter
Socket Mode
Transparent
Clear the receive buffer at communication.
190.238.254.254
0.0.0.0 (Not Used)
0.0.0.0 (Not Used)
1111
2222
Enable (Used)
0.0.0.0 (Not Used)
0 (Not Used)
10 times
Connected by the receive data.
Disconnected by the timer.
90 seconds
60 seconds
Baud Rate: 38400 bps
Data Length: 8 bits
Parity: EVEN
Stop Bit: 1 bit
Protocol: XON/XOFF without Flow Control
ON status by turning the printer power ON
None
TELNET Setting
Impossible
Impossible
Possible
Possible
Possible
Possible
Possible
Impossible
Possible
Possible
Possible
Possible
Possible
Impossible
Possible
Impossible
Impossible