TEC B-450 SERIES, Руководство пользователя

Страница: 163 / 222

6-13
EO18-33003A 6. DIAG. TEST OPERATION
■
[
↓
] key: Pressing the [
↓
] key one time is a
-0.5 mm change, up to -10.0 mm
(B-452-TS model)/-50.0 mm (B-452-
HS model). (See NOTE 2.)
■
[
↑
] key: Pressing the [
↑
] key one time is a
+0.5 mm change, up to +10.0 mm
(B-452-TS model)/+50.0 mm (B-
452-HS model). (See NOTE 2.)
6.3 PARAMETER SETTING MODE
6.3.1 Feed Length Fine Adjustment
NOTES: 1. Holding the [
↓
] key or [
↑
] key down for more than 0.5 seconds enables a fast forward.
2. Max. fine adjustment
±
10.0 mm (B-452-TS)/
±
50.0 mm (B-452-HS) = Key fine
adjustment value (
±
10.0 mm) + PC fine adjustment value (B-450-TS:
±
10.0 mm/
B452-HS:
±
50.0 mm)
When the value reaches the maximum, the value remains unchanged even if the
subsequent fine adjustment is performed.
3. A change feed value is stored in keyboard memory by pressing the [
→
] key.
< 1
D I A G .
>
< 2
P A R A M E T E R S E T
>
Power off
F E D A D J . + 0 . 0 m m E
S E
T O P R I N ?
T T E R
Y E : [ E N T ] N C ] S O : [
Turn on the power while
holding down the [SHIFT]
key.
Press the [
↓
]key.
Press the [
→
] key.
Press the [
↓
] or
[
↑
] key to adjust
the feed length.
(See NOTE 1.)
Press the [ENTER] key.
Press the [
→
] key.
Continued on Section 6.3.2
Cut/strip position fine adjustment.
Press the [ENTER] key or [C] key.
Press the [C] key.