44
to reset error status, then UPS would stop alarm and recover to
Bypass mode. And the reason of fault should be checked and
deleted before UPS is turned on again by manual operation.
4) Restore factory settings: all the settings would be recover to
default factory settings. It could only be done in Bypass mode.
Figure. 5-17 Control menu tree
45
5.4.6 The identification menu
By press
on the menu of “Identification”, the display would
enter the next identification menu tree.
The identification information includes UPS serial number, firmware
serial number, model type, would be shown here.
By press
>1s, the display would return the last main menu tree.
Figure. 5-18 Identification menu tree
5.4.7 The setting menu
Please contact your local distributor for further information before
using the settings. Some settings would be changed the
specification, and some settings would enable or disable some
functions. The unsuitable option setting by user may result in
